MakerWorld

Hueforge & Lithophane

Dragon Hueforge

by Garuda3D · Hueforge & Lithophane

1 Downloads

3 Likes

0 Makes

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue Gray At layer #15 (1.28mm) swap to Jade White for the rest.

hueforge dragon 2d art fantasy card

Category

Hueforge & Lithophane

Source

MakerWorld

Published

27.05.2024

Updated

30.04.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

50 mm (Small)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Dragon Hueforge?

Any FDM printer should handle Dragon Hueforge just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does Dragon Hueforge need supports when printing?

Yes, Dragon Hueforge will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is Dragon Hueforge available in?

Dragon Hueforge is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Dragon Hueforge free to download?

Yes, Dragon Hueforge is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Dragon Hueforge

Similar Models

Add to Collection