Dragon Hueforge

Dragon Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in size (or 150x150mm)You may print at higher layer heights below the Min Depth of 1.1mmThe Max Depth is 3.8mm and the Actual Depth is 2.5mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.2PLA PolyLite Blue Transmission Distance: 1.5PLA PolyLite Aqua Blue Transmission Distance: 3.3PLA BambuLab Basic Jade White Transmission Distance: 5.8This print uses 4 unique filaments ***attached .3mf file prints the first 6 layers at 0.16mm then the rest at 0.08mm for faster print time******the layer numbers will be different but the layer height will be the same*** Swap Instructions:Start with BlackAt layer #15 (1.28mm) swap to BlueAt layer #17 (1.44mm) swap to Aqua BlueAt layer #22 (1.84mm) swap to Jade White for the rest. Check out my Hueforge Display Collection here (Frames, Stands, Book Nooks) Check out my other models and hueforge files here Don't forget to