Dragon HueForge

Depend on the white you have will give different result





Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm



You may print at higher layer heights below the Base Thickness of 0.32mm
The Max allowed Thickness is 1.2mm and the Actual Thickness is 1.2mm


#080a0d PLA PolyLite Black Transmission Distance: 0.3
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
#c1101d PLA Kexcelled Red Transmission Distance: 4.5
This print uses 3 unique filaments


Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Jade White
At layer #12 (1.04mm) swap to Red for the rest.