MakerWorld

Hueforge & Lithophane

Dragon

by 3T3D · Hueforge & Lithophane

7 Downloads

13 Likes

3 Makes

Start with Black At layer #10(0.8mm) swap to Gray At layer #16(1.04mm) swap to light Gray At layer #21 (1.28mm) swap to Jade White for the rest.

Category

Hueforge & Lithophane

Source

MakerWorld

Published

28.05.2024

Updated

30.04.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed · 4 colors

Single piece Supports required 4 colors / AMS

Supports 2/3

Assembly 0/3

Settings 3/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

50 mm (Small)

Colors

4 (AMS/MMU recommended)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Dragon?

Any FDM printer should handle Dragon just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does Dragon need supports when printing?

Yes, Dragon will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is Dragon available in?

Dragon is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Dragon free to download?

Yes, Dragon is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Dragon

Similar Models

Add to Collection