Dragon

by Savick_3D

25 Downloads

30 Likes

14 Makes

Download Model

HueForge Project: Dragon! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm The Model is a 125x125mm sized square. Filaments Used:PLA Inland BlackPLA Inland Light GrayPLA Inland BeigePLA Inland White This print uses 4 unique filaments. FEEL FREE TO USE YOUR OWN FILAMENT BRANDS. The end result will vary slightly with different brands and opacities, but it shouldn't be a significant difference if the colors are close to the same. Swap Instructions: (if you do not ha