Dragon Pose

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size. You can change X and Y but Z must stay the same.You may print at higher layer heights below the Min Depth of 0.48mmActual Depth is 2.2mm Filaments Used:PLA BambuLab Basic Red Transmission Distance: 4PLA BambuLab Basic Orange Transmission Distance: 5PLA BambuLab Basic Yellow Transmission Distance: 6PLA BambuLab Basic Black Transmission Distance: 0.3PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Basic Dark Brown Transmission Distance: 2PLA BambuLab Basic Beige Transmission Distance: 8PLA BambuLab Basic White Transmission Distance: 5This print uses 8 unique filaments. Substitute as needed. Swap Instructions:Start with RedAt layer #8 (0.72mm) swap to OrangeAt layer #11 (0.96mm) swap to YellowAt layer #13 (1.12mm) swap to BlackAt layer #19 (1.6mm) swap to Blue GrayAt layer #20 (1.68mm) swap to Dark BrownAt layer #22 (1.84mm) swap to BeigeAt layer #25 (2.08mm) swa