dragon rider hueforge

Project: hombre dragon.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 173.6x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA smartfil negro Transmission Distance: 0.4 PLA smartfil marron Transmission Distance: 5 PLA BambuLab Basic Beige Transmission Distance: 8 PLA smatfil White Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with negro At layer #9 (0.8mm) swap to marron At layer #12 (1.04mm) swap to Beige At layer #17 (1.44mm) swap to White for the rest.