Thingiverse
Dragon Samurai Helmet
door MikeLand
293
Downloads
650
Likes
1
Makes
My Dragon Samurai Helmet Printed on my Flashforge Adventurer 5m Pro
The first ring is the most difficult to attach I applied glue and clamped the ring to the helmet.
Make sure you center it well on the helmet.
Then I plastic welded the ring inside of the helmet as well this might be overkill.
Also, I drilled out the top holes on the ring and through the helmet, I tried to add the holes to the helmet but could never get the alignment right.
The other rings are sewn in place with gold string.
The curls I attached by plastic welding to the first ring you could probably use epoxy for this I found melting the plastic together with a soldering iron works great for me.
The first ring is the most difficult to attach I applied glue and clamped the ring to the helmet.
Make sure you center it well on the helmet.
Then I plastic welded the ring inside of the helmet as well this might be overkill.
Also, I drilled out the top holes on the ring and through the helmet, I tried to add the holes to the helmet but could never get the alignment right.
The other rings are sewn in place with gold string.
The curls I attached by plastic welding to the first ring you could probably use epoxy for this I found melting the plastic together with a soldering iron works great for me.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!