Dragon Scale Tall Table Lamp

I couldn't find a tall table lamp on MakerWorld so I ended up designing one. With the lampshade this lamp is approximately 80 cm or 31.5 in. My design intent was to make a tall table lamp that would print well in both petg and pla with a minimal amount of support and no extra fasteners. Support is only required for one part and if you choose to print this in pla the lampshade holder will still have to be petg in case your lightbulb gets hot. Printing: I recommend printing this with the included settings at a .12mm layer height. If that is too time-consuming switching up to a .2mm layer height will work, the only difference is that the level of detail will suffer. The snap joint and threads will still work. Before printing the full lamp use the test prints to verify your material is suitable for the different connections. I also used a glue stick on the bed to ensure the larger body parts wouldn't come loose mid-print. Bill of Materials:E26 LightbulbE26 Lightbulb Socket (this wi