Dragon Symbol

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 200x200mm in size. You can change X and Y but Z must remain the same.  You may print at higher layer heights below the Min Depth of 0.48mm  Actual Depth is 2.3mm Filaments Used: PLA BambuLab Basic White Transmission Distance: 5 PLA BambuLab Basic Black Transmission Distance: 0.3 This print uses 2 unique filaments. Substitute as needed. Swap Instructions: Start with White At layer #16 (1.36mm) swap to Black for the rest.