Dragon Trainer - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 127x170mm in size PLA BambuLab Basic Black PLA BambuLab Basic Blue Gray PLA BambuLab Basic Grey PLA BambuLab Basic Jade White PLA BambuLab Basic BambuLab Green This print uses 5 unique filaments Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Blue Gray At layer #15 (1.28mm) swap to Grey At layer #19 (1.6mm) swap to Jade White At layer #23 (1.92mm) swap to BambuLab Green for the rest. Frame Version: At layer #26 (2,16mm) swap to Grey for the rest. If you want to print it in four colors, you can remove the green. For those who don't have an AMS or only have one, and the project uses more than four colors, you just need to replace the color changes with pauses and switch the filament manually. If you wish to enlarge this project, you can freely scale the X and Y axes. However, it is crucial to keep the Z height at 100% (do not change it). This ensures that the filament color swaps