Dragonair Hueforge

DO NOT CHANGE THE Z-HEIGHT. For ease of use, i suggest unchecking the “UNIFORM SCALE” and change X and Y Percentace only when editing size; Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x206.38mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used:PLA BambuLab Matte Charcoal Transmission Distance: 0.6PLA BambuLab Matte Marine Blue Transmission Distance: 0.5PLA