Slicer Discord
DragonBall Piccolo – 3D-printbaar model van MakerWorld MakerWorld
Hueforge & Lithophane

DragonBall Piccolo

4 Downloads
4 Likes
0 Makes
Model downloaden
DescriptionDragonBall Piccolo Print at 100% infill with a layer height of 0.05mm with a base layer of 0.16mm The Model is 150x93.75mm in size You may print at higher layer heights below the Min Depth of 0.46mm The Max Depth is 2.3mm and the Actual Depth is 2.3mm Filaments Used:PLA+ Sunlu Black Transmission Distance: 0.6PLA Sunlu Matte Green Transmission Distance: 3PLA+ Sunlu White Transmission Distance: 5 Swap Instructions:Start with BlackAt layer #12 (0.71mm) swap to GreenAt layer #26 (1.41mm) swap to White for the rest.
Categorie
Hueforge & Lithophane
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Beginner Lage betrouwbaarheid
Eendelig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 0/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie