Draw Organiser

Design ConceptTo create a custom draw organiser for various office supplies including pens, pencils, highlighters, erasers, stamps, etc.It needed to be able to be printed on a small sized print bed, which is why I had to create it in sections. The sections interlock using a dowel and socket type connection which are part of the design. It does not require any glue or screws or other means of securing the sections together. Dimensions of completed draw organiser is 450mm(l) x 310mm(w) x 60mm(h).If you are after a draw organiser with different dimensions, drop me a message and I will design one to your specs.Printer SettingsPrinter: Creality Ender-3 S1 ProMaterial: PLA+Slicer: CuraProfile: Standard Quality (0.2mm)Changes made to the Standard QualityInfill Density: 10%Printing Temperature: 220Build Plate Temperature: 65Generate Support: TrueSupport Placement: Touching Build PlateSupport Density: 15%Build Plate Adhesion: None (however you can change this to what you prefer)Assembly InstructionsConnect each section by lining up the pins and sockets on the two sections. Connect one section at a time in the order S1 -> S2 -> S3. This creates the left-hand side. Then connect S4 -> S5 -> S6a. This creates the right-hand side. Once both sides are connected, join them together.