Drawer for Pössl Summit

This is a drawer exclusively for the camper Poessl Summit. It can be fixed with 4 screws 2.5mm (or glue) to the existing kitchen drawer door. So you can use the small space above the ventilation grille from the fridge. It is printed in two parts and assembled without glue. Do not ! glue it together, because it must be assembled after the back part is first put into the opening of kitchen drawer. Only then you can attach the front. Ther is not enough space to put it in one part in this opening. After this you can attach the drawer with the screws to the front panel. You might put some felt (Filz) under the drawer for convenience. I used PETG because of probable heat in the camper, but you can also use PLA. The orange boxes you see on the photos are boxes which fit exactly inside the new drawer. Large box and small box.