Cults3D
€ Paid
Art
Zum Modell
Dread Drake
0
Downloads
0
Likes
0
Makes
A 3D-printable concept based on the idea: A powerful dragon bust featuring thick, overlapping obsidian-like scales and a heavy, spiked neck ridge.. Designed as one connected, display-ready object.
This design is offered as a digital file for home 3D printing. It is shaped as one connected object with a broad flat base and thick details, with gentle overhangs to keep the print straightforward on a typical FDM printer.
Recommended print settings (a starting point -- adjust to your printer and filament):
- Layer height: 0.20 mm for general use; 0.12-0.16 mm for finer surface detail
- Infill: 15-20% for display pieces; 30%+ for parts that take load
- Supports: Designed to minimise supports; add tree/auto supports if your slicer flags overhangs
- Suggested materials: PLA, PETG
Orient the flat base on the build plate for the most reliable first layer.
This design is offered as a digital file for home 3D printing. It is shaped as one connected object with a broad flat base and thick details, with gentle overhangs to keep the print straightforward on a typical FDM printer.
Recommended print settings (a starting point -- adjust to your printer and filament):
- Layer height: 0.20 mm for general use; 0.12-0.16 mm for finer surface detail
- Infill: 15-20% for display pieces; 30%+ for parts that take load
- Supports: Designed to minimise supports; add tree/auto supports if your slicer flags overhangs
- Suggested materials: PLA, PETG
Orient the flat base on the build plate for the most reliable first layer.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
