Thingiverse
Drill Guide for Corner Hole
by Eagle390
0
Downloads
1
Likes
0
Makes
A quick design to help drill a 10mm holes into the corner of 15mm board.
Slip over the corner and drill away!
Shouldn't need any supports to print.
Designed to have exactly a 10mm hole and 15mm inner, so you may need to scale up for clearance if you're having trouble fitting, or (just use a hammer!). Both hole and wood side have chamfers to help fitting.
Designed to be a tight fit with thick walls so the print helps support the board to reduce the chance of splitting.
Slip over the corner and drill away!
Shouldn't need any supports to print.
Designed to have exactly a 10mm hole and 15mm inner, so you may need to scale up for clearance if you're having trouble fitting, or (just use a hammer!). Both hole and wood side have chamfers to help fitting.
Designed to be a tight fit with thick walls so the print helps support the board to reduce the chance of splitting.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!