Drill Guide Heatpress Insert for Pinecil

von Crashkg · Other Tools

40 Downloads

28 Likes

0 Makes

I kept heat pressing my inserts at an angle so I looked for a solution, but none of them fit the equipment I had. This collar will attach a Pinecil soldering iron or any other one with a similar shape to a drill press or drill guide. I have included files for a 42.75mm chuck and a 53mm chuck. The 42mm one is the size of the Woodpeckers Auto Angle Drill Guide, it is a standard size 1/2" chuck. The 53mm chuck is on a Craftsman drill press, but that is pretty standard as well. If your drill press has a different size chuck let me know and I can adjust the files. You will need 4 M3 x 12mm bolts and 4 M3 nuts to clamp it tight. Happy Printing!

collar drill soldering craftsman clamp drillpress heatsetinsert woodpecker t100 threadedinsert pinecil cnckitchen drilling guide woodpeckers cnckitcheninserts

Kategorie

Other Tools

Quelle

MakerWorld

Veröffentlicht

24.03.2024

Aktualisiert

30.04.2026

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat

STL

Material

Wood PLA

Nachbearbeitung

Hardware

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

Drill Guide Heatpress Insert for Pinecil

Ähnliche Modelle

Zur Sammlung hinzufügen