Drill press table mounting kit

This model is for a mounting kit to mount a drill press fence and table to a drill press. It works with my other models (removeable insert and drill press fence). The mounting kit includes: a knob a channel for the bolt a u shaped washer a guide for the bolt head a template for routing the slots The drill press fence model is available here External tools and hardware To install this, you will need: A router A 5/8" bushing adapter for a router. a 3/8" inch router bit and a 1/4" router bit. For metric: 2x M10x75mm (or longer) bolt and 2x M10 nut. 2x 3/8"x16 x 3" (or longer) bolt 2x 3/8"-16 nut. The length of the bolt will vary depending on the thickness of your table and drill press table. Instructions Instructions are provided. See the model photos. Instructions are given in the photos. I apologize if I am using the imperial system but it is the more common system here for woodworking and I own very few metric sized tools. An inch is 25.4 mm so the conversion should be fairly simple. I thank you for your understanding. 3d Printing A print profile is provided. IMPORTANT: There is a metric and an imperial template. You do not need to print both. If you click on the parts you will see their description. The model requires no support. I printed this with 0.2mm and 15% infill. About me   I enjoy creating 3d models that others can use and appreciate. It is a very fun pastime. I find it very rewarding to see my models downloaded and printed. I put lots of thought, time and effort to create each model print out multiple iterations to make sure it works just right. If you liked my model and wish to encourage me please give it a like. If you wish you can also help me with my filament costs. You can also use the discount codes listed below. You will save and I get a small commission for certain purchases. Thank you. DISCOUNT CODES FOR ANYCUBIC PRINTERS AND FILAMENT Here are some discounts codes that you can use to save on filament and printers. Note the discount codes may not