Slicer Discord
Drill Press Vise - Mostly Printed – 3D-Druckmodell von MakerWorld MakerWorld
Machine Tools

Drill Press Vise - Mostly Printed

359 Downloads
147 Likes
164 Makes
Zum Modell
Drill Press Vise Mostly Printed No Supports Two Tone Color Scheme Easily Change Grip Inserts Torque Bolt BOM Printed Parts 2X 12mm M3 Hex Socket Cap Screws* 2X M3 nuts Instructions Capitalized items are printed parts. The printed parts marked with an [a] should be printed in your accent color. Print multiples of anything with an x2 or x4 in the name. The Torque Bolt can printed instead of the Bolt_Extended. Place the Drive Collar in the vise Body, the holes should align. Screw the Bolt through the Drive Collar Place the M3 nuts in the Lower Jaw, trapped, and place it under the Bolt, cupping the ball joint end of the Bolt. Screw the M3 bolts through the upper jaw into the Lower Jaw. To ensure that your nuts don't turn in the slot, push a flathead screwdriver inside the nut trap in the Lower Jaw when fully tightening. Don't overtighten. The Lock Bolts are made to be pushed through the slots. They have a square shank that will not turn in the slide rail. You can screw them together with t
Kategorie
Machine Tools
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Warum?
keine Supports
Ohne Supports Einteilig Hardware nötig
Supports 0/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Gleicher Designer, mehr Plattformen

thebelin veröffentlicht auch auf

32 zusätzliche Modelle auf 1 weiteren Plattformen

Verifiziert durch übereinstimmende Modelltitel über Plattformen hinweg.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen