Thingiverse
Drill Spool Winder
door parametricfab
70
Downloads
47
Likes
0
Makes
You'll need an m8 or 1/4" (0.25) bolt or all thread about 4-6" (100-150mm) and two nuts.
There are several versions for 1/4" or M8 bolt with a slip fit or the proper size for cutting threads.
Files labelled slip are a slip fit for the m8 or 1/4" bolt as specified in the file name.
Files labelled cut are sized for tapping threads for the specified bolt size.
0.25 = 1/4"
M8 is M8
There are two sizes. 30 to 61 diameter and 48 to 75 diameter. Both should fit most spools.
There are several versions for 1/4" or M8 bolt with a slip fit or the proper size for cutting threads.
Files labelled slip are a slip fit for the m8 or 1/4" bolt as specified in the file name.
Files labelled cut are sized for tapping threads for the specified bolt size.
0.25 = 1/4"
M8 is M8
There are two sizes. 30 to 61 diameter and 48 to 75 diameter. Both should fit most spools.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
