drink in bottle

Project: cocacola.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 88.38x125mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 1.4mm and the Actual Depth is 1.4mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 4 unique filamentsSwap Instructions: Start with Charcoal At layer #8 (0.72mm) swap to Scarlet Red At layer #10 (0.88mm) swap to Lemon Yellow At layer #13 (1.12mm) swap to Ivory White for the rest.