Dripping Hook Phrozen Sonic Mega 8K

The build plate of the Phrozen Sonic Mega 8K is very large and the top is flat, so it tends to retain a lot of resin. So I designed a drip hook to save resin and avoid putting it everywhere when unsticking the print.
Considering the weight of the build plate I advise you to use PLA and a high number of perimeters.

Here are the settings I personally used (see photo) for a 0.4mm nozzle with 0.2mm layer height with plusa slicer:
In the menu: print settings / Layers and perimeters / Vertical shells put 12 perimeters.
To have a honeycomb filling visible in the menu: horizontal hulls / solid layers put 0 upper layers and 0 lower layers. In the Infill menu: place the infill pattern on Honeycomb and set the infill density to 30%. you can in the menu Avencer:
set the filling angle to 0 °