Slicer Discord
Drive rack – 3D printable model from Thingiverse Thingiverse

Drive rack

22 Downloads
23 Likes
0 Makes
Go to Model
HDD drive rack
I designed this rack to hold 16 drives in total. 8 3.5inch drives and 8 2.5inch drives.
If you're anything like me. You have a pile of decent, salvaged drives lying around the house. With a rack like this, you can organize them neatly in one location and wire them into a DAS storage.

What you'll need:
HBA Raid card - im using this one: https://aliexpress.com/item/1005005956392017.html?
SAS to x4 sata cable - https://aliexpress.com/item/1005006245221731.html?
One or two 120mm fans - im using these cheap ones - https://aliexpress.com/item/1005002642198655.html?
M3 threaded inserts - https://aliexpress.com/item/1005006071488810.html?
Optional dampening pads - https://aliexpress.com/item/1005005854472187.html?

*I also tested regular sata expansion cards but i found them unreliable and slow, Raid cards are the best solution here. Just install the raid card, connect SAS to sata cables, connect all drives and set up the software raid via windows drive pool configur
Source
Thingiverse
What you need to print this: Intermediate Low confidence
Single piece Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

2 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection