Thingiverse
Drive-Thru Capsule
di Breakdansen
3
Download
8
Likes
0
Makes
Modeled for use in the drive-thru at Walgreens.
Use 2 ss cs per drivethru qd.
Align print so that the flat sides face the build plate. The top half has threading for attaching to the bottom, so area around the threading will need supports (carefully remove supports from the outside to the inside to avoid snapping the threading portion off). The bottom half has a cone shape at the top of the threading so that it will not need supports.
Requires 2x 3/8 inch nuts to fit the existing threading in the store's fixture. Line up nuts on a bolt before gluing into the bottom of the capsule for a continuous thread (nuts and bolt can be found at your local hardware store, i found mine at Ace's).
Use 2 ss cs per drivethru qd.
Align print so that the flat sides face the build plate. The top half has threading for attaching to the bottom, so area around the threading will need supports (carefully remove supports from the outside to the inside to avoid snapping the threading portion off). The bottom half has a cone shape at the top of the threading so that it will not need supports.
Requires 2x 3/8 inch nuts to fit the existing threading in the store's fixture. Line up nuts on a bolt before gluing into the bottom of the capsule for a continuous thread (nuts and bolt can be found at your local hardware store, i found mine at Ace's).
Breakdansen pubblica anche su
4 modelli aggiuntivi su altre 1 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
