Drone Paws

These are drone feet and arm protectors for 12 x 12 motors. Two of the motor screw holes are open, so that 2 screws are clamping firmly to the carbon. the other two holes are counter sunk, so the screw holds the paws in place. That means 2 screws will need to be 1.5 mm longer. - Yeah, that's an annoying difference, but it's the thickness that works best in testing. Just use 2mm longer screws, unless they get too close to the windings, then go with 1mm longer instead.

Printed in TPU. 0.15mm layer height. Sainsmart TPU