drone quadcopter

Garud-500 can be 3d Printed with below print specifications: - Layer Height: 200 - 300 Microns - Infill: 30% (50% for more strength) - Infill Pattern: Rectilinear - Shell Thickness: 0.8mm - 1.2mm - No Support required - Rafts Enabled - Temperature - 210 C PLA | 230 C ABS Bill of materials : 4 x Arms (3D Printed) 1 x Top Plate (3D Printed) 1 x Bottom Plate (3D Printed) 16 x M5 Screws 16 x M5 Nuts 4 x Brushless Motors (2206 - 3600 Series | 700KV - 1200 KV) 4 x ESC’s (30A - 40A) 4 x Propellers (8045 | 9050 | 9060 | 1045 | 1050) 1 x Flight Controller (Naze 32 | Open CC3D | APM 2.7 | Pixhawk | DJI Naza V2) 1 x Lipo Battery (2200mah - 5000mah | 3S - 4S) 1 x Radio Controller (Taranis | Flysky Fs-i6)