Drop bottle paint rack

Drop bottle paint rack. Designed for Army painter warpaints bottle 25 mm diameter and 78 mm height.
Designed to use a 5 mm diameter rod. I used some cheap wooden sticks from my local craft store. I paid about 1$ for 10 sticks which were 300 mm long.
Building process:
1. Print 2 end plates either in 1 level or 2 levels. I printed in 0.28 mm layer height and 10% infill.
2. Make sure all your wooden sticks are exactly the same length. I used about 300 mm.
3. Test fit all your wooden sticks in each hole.
4. Apply glue to one end plate ( I used super glue.) then fit your sticks in each hole.
5. This part is a bit fiddly. now apply glue to the other end plate holes and guide each stick in place.

If you have any suggestions please leave a comment and please post a picture if you build this.