Drum Stick Prosthetic

Equipment Needed:
3D printer
x4 of #6 3/4 inch long screws
x6 of #6 1/2 inch long screws
padding
velcro
rubber bands
x2 of #8 screwable hooks
drum sticks

Note: The equipment needed above is only good for one arm. If two Drum Stick Prosthetics are needed for two arms, more of the equipment above will be needed. Also, the exploded view is not up to date with the current design. The exploded view is included only for reference.

Steps to Build the Drum Stick Prosthetic for Bicep and Forearm
1. Print out all of the parts:
x2 Spacers
x2 Rings
x1 Rotator_Base
x1 Rod
x1 Forearm_Cuff (Make sure to print this using a thermoformable filament)
x1 Bicep_Cuff (Make sure to print this using a thermoformable filament)
x2 Base Connectors

2. Sand off the Formarm_Cuff and Bicep_Cuff to make sure they have a smooth finish.

3. Attach the Rotator_Base to the 2 Base_Connectors by placing the 2 Base_Connectors on each side of the Rotator_B