Dry Box (Rewindable)

Dry box for 3D printer (rewindable)

Hub axle
https://www.thingiverse.com/thing:1241566

The product created this time is the peripheral part using the above hub axle.
I made a BOX that can be rewound

What you need
8 or 16 neodymium magnets
2 shield bearings (outer diameter 22 mm, inner diameter 8 mm, width 7 mm)
Box without 5mm rod or 8mm rod or lot
Double-sided tape (magnet stop)
Thermo-hygrometer (round product made by Daiso)
Moderate length PTFE tube and 1 pc4-M10 straight pneumatic fitting
M4x10mm & 4 nuts

BOX is a sealed container of DAISO INDUSTRIES CO., LTD 5.5L
The height inside the container is about 110 mm

Make an 8mm hole in the middle of the BOX
(If you don't use a stick, you don't need to make a hole.
However, it is necessary to install the filament holder in the BOX)
Hub length 105mm
Printed adapter and washer
(There are various types of boxes, but please make a spacer according to the box.)


Printer Brand: Creality

Printer Model: