Dry / extrude box

Hey everyone, since I did not find a matching dry box from which I could extrude directly in to my Creality Ender 5 S1 I designed my own one. Of course it can be used for any other printers.

In addition to the printed parts I have bought the following parts:
- PVC-bar (If you want to you could also print these ones so I added the STL-files dry_box_pvc_bar_22 and dry_box_pvc_bar_47)
https://www.bauhaus.info/metallprofile-kunststoffprofile/winkelprofil/p/25397307

- Plexiglas 25mm x 50mm (Bottom, back and top do not need to be cut ,for the side walls you can simply cut a piece in half, the door at the front must be cut to size for this, I did this with a cutter knife)
https://www.bauhaus.info/aluplatten-kunststoffplatten/hobbyglas-owocor/p/14211149?adb_search=Plexiglas

- Bar
https://www.hornbach.de/p/rundstange-alu-natur-o-8-mm-1-m/6449136/

- 2 x thread insert M4 (for handle)

For corners:
- 48 x M4x10 hexagon screw
- 48 x M4 nut
- 48 x M4 washer

For hinges:
- 6 x