Drybox / Spoolholder

Printed with Bambu Lab PLA Basic @ 0,4mm nozzle. To print this model with the settings I used, you must have PETG inside your AMS to use for support interface. (Clear PETG is recommended) This drybox should fit all AMS-size spools, Allowed dimensions: Maximum outer diameter spool: 208mm (to fit inside container) Minimum internal width between the flanges: 55mm Maximum outer width: 78mm. (safe) → up to 93mm but with risk of falling off Parts list: 1x Brabantia Tasty+ container 5,4L (229985) 1x Hygrometer Sprifityy (744915819394) 4x Bearing 608ZZ 1x PC4-M10 Pneumatic connector ~300 gr. Silica gel drying beads (20cm height inside container) Some PFTE tubing Additional information This spool holder can be used standalone without a container, in that case I recommend adding some rubber buttons underneath. This setup will get the humidity inside the box to 10%, provided the silica gel has enough capacity. Will probably work with a 0,6mm and 0,8mm nozzle, though I haven't tested it. I chose t