MakerWorld
Engineering
Go to Model
Dual element racing wing
19
Downloads
25
Likes
3
Makes
This is the wing I've been working for my corvette track car, it has a 13-½" chord and a span of 74". This is built from segmented ASA-CF prints with solid PPA-CF support sections. The segments of the main wing element are mounted to a pair of 38MM carbon fiber tubes for support. I bonded everything together with West Epoxy Systems and 404 high density filler, after the prints are bonded to the carbon tubes the whole wing is wrapped in carbon twill in a vacuum infusion or wet layup. The end caps of the wing are designed to fit 10-32 threaded heat set inserts to mounts whatever end plates you decide to go with. If you're only building the main wing element you will only require the first 4 items on the material list. Material list is in the last photo, you need more than 1 tube to span the length of the wing and that's reflected in the quantities. The tubes “telescope” inside each other hence the different sizes. If you build this you MUST test the tolerance between
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!