Thingiverse
Dual rotary encoder for simulator cockpit
par g0per
74
Téléchargements
39
Likes
0
Makes
Dual knob mount for radio management panels or Garmin autopilot panels. Designed for EC11 5 pin rotary encoders with round knob (parts grip by pressing on it).
Buttons on both encoders are not disabled, please note that the upper chassis (chassis2.stl) is 1mm thick on the button area, and either that panel should be replaced by your top cover, or you need to enlarge engranaje2.stl and tubofino.stl according to the added width if you mount the cover on top of it.
If you dont want to use the buttons, ignore the one on the mount and fill the hole for the small dedicated one. Dont remove the chassis2 spacers, they provide junction stability.
Youll need also:
* 16mm spacers: x4
* M3 screws: x8
* M3 nuts: x4
* M3 washers: x4 (on top of chassis.stl)
* EC11 rotary encoders: x2
Buttons on both encoders are not disabled, please note that the upper chassis (chassis2.stl) is 1mm thick on the button area, and either that panel should be replaced by your top cover, or you need to enlarge engranaje2.stl and tubofino.stl according to the added width if you mount the cover on top of it.
If you dont want to use the buttons, ignore the one on the mount and fill the hole for the small dedicated one. Dont remove the chassis2 spacers, they provide junction stability.
Youll need also:
* 16mm spacers: x4
* M3 screws: x8
* M3 nuts: x4
* M3 washers: x4 (on top of chassis.stl)
* EC11 rotary encoders: x2
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
