Thingiverse
Dual-Z Alignment Tool
by Badadz
2.1k
Downloads
1.2k
Likes
2
Makes
Zip Direct Link: https://www.thingiverse.com/thing:5168992/zip
I mainly built this for myself to ensure my dual Z screws on both my Ender 3 Pro and Ender 5 Plus are in sync. When testing level if the level is off by left to right, it is likley the screws are out of sync. (I use solid bed mounts so it is usually just this to do occasionally)
This will work for any printer where the X Axis is a 2020 extrusion size (I.e. Most Creality and Creality similar printers such as Voxelab. You only need this if you have dual Z axis on them.
Print 2 of these.
Use:
Ensure x & y are centered & increase Z height to 30mm and then turn off printer
Insert tools on each side evenly and manually lower for a snug fit
Turn on printer and raise z height a few mm using the printer controls and remove tools
That should be it. Hope it helps you. Post your make as I like seeing my items made.
I mainly built this for myself to ensure my dual Z screws on both my Ender 3 Pro and Ender 5 Plus are in sync. When testing level if the level is off by left to right, it is likley the screws are out of sync. (I use solid bed mounts so it is usually just this to do occasionally)
This will work for any printer where the X Axis is a 2020 extrusion size (I.e. Most Creality and Creality similar printers such as Voxelab. You only need this if you have dual Z axis on them.
Print 2 of these.
Use:
Ensure x & y are centered & increase Z height to 30mm and then turn off printer
Insert tools on each side evenly and manually lower for a snug fit
Turn on printer and raise z height a few mm using the printer controls and remove tools
That should be it. Hope it helps you. Post your make as I like seeing my items made.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
