MakerWorld
Electronics
Ver Modelo
Dualshock 4 / PS4 Controller L2 and R2 Button Replacements
289
Descargas
56
Likes
154
Makes
One of the triggers was broken on my PS4 controller, and I decided to 3D model some new ones instead of replacing them with generic replacements. These are flat replacement L2 and R2 buttons for the first gen PS4 controller (CUH-ZCT1). The buttons are not modeled to be exact replacements, they are flat and chamfered on the front, both as I wanted something that was a bit nicer to use, and to make it much easier to 3d print. This requires disassembling the controller to install, and will replace the original triggers entirely. Here is a guide from Ifixit on disassembling the PS4 controller enough to get to the triggers: https://www.ifixit.com/Guide/DualShock+4+(CUH-ZCT1U)+Battery+Replacement/22074Here's an Ifixit guide on installing the spring and trigger: https://www.ifixit.com/Guide/DualShock+4+(CUH-ZCT1U)+Battery+Replacement/22074 These are fully 3d printable, though it will need supports for the hinge pins. Printing at the lowest layer height you can will result in the best print, t
DarknessInDaylight también publica en
4 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!