Slicer Discord
Duplicator i3 Filament Stand – 3D printable model from Thingiverse Thingiverse

Duplicator i3 Filament Stand

145 Downloads
48 Likes
3 Makes
Go to Model
I wanted a replacement stand for the Wanhao Duplicator i3 that would allow the spool to rotate smoothly so the extruder would not jerk the spool. I also wanted it to mount using the two existing screw locations and accomodate any size spool.

This is my second try at a the spool stand, the first version had a problem with the top of the inside supports hitting the filament when the spool was full. This new version hopefully fixes that problem. I also changed the design so that it now prints in three parts; a base and two sliders. The base mounts in the stock location on top of the printer and the two sliders slide onto the base. The spool rolls on four u-shaped bearings (guide wire bearings). The sliders have a hole for a m4 screw to lock the slider in position on the base, locking down one slider is sufficient since the deep u-shape of the bearings will keep the other slider in place. The only difference between the two sliders is the location of this hole.

The bearings are
Source
Thingiverse
What you need to print this: Intermediate Low confidence
Single piece Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
PLA
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection