Duskshade Marquis-15CM;暮影侯爵

the model is in its initial creation stage and will be further refined for higher detail later. Use thin supports, as they are very difficult to remove. The model has passed the printing test, with a print size of 10 cm and a design size of 15 cm. It is recommended to print with PLA filament. 该模型目前处于初步创建阶段，未来将进一步完善以获得更高细节。 使用薄支撑，因为它们非常难以去除。 该模型通过了打印测试，打印尺寸为10厘米，设计尺寸为15厘米。 建议使用PLA耗材打印。