Slicer Discord
DW Hobby Mini Eagle motor mount – 3D-printbaar model van Thingiverse Thingiverse

DW Hobby Mini Eagle motor mount

door LANEBoysRC
16 Downloads
19 Likes
0 Makes
Model downloaden
This is a extension motor mount for the Dancing Wings Hobby (DW Hobby) Mini Eagle 1200mm. The kit's motor mount, when mounted according to the laser cut parts, would sit too far back. The instructions seem to suggest to instead glue the motor mount directly on the foam, which would result in a weak joint (see YT videos... 1 flight -> broken).

This motor extension allows you to use the original motor mount yet put the motor in the correct position. It also has a 2.5 degree right and down thrust built in as suggested in the latest revision of the manual.

The motor fits the recommended 2212 brushless outrunner, which has the traditional 16/19 mm spacing for the mounting holes. Only the two 16 mm spaced holes are used for this mount.

You will need two M3 x 8 button head screws to secure the motor. OpenSCAD source code is included so you can alter the mount for other screw lengths.
Bron
Thingiverse
Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid
Waarom?
uitgebreide nabewerking
Eendelig Hardware nodig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 2/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
Nabewerking
Lijmen, Hardware
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie