Dynamic Tool Clip for MultiBoard

Tool Clip – Parametric Multi-Board Holder (Remix)This clip started as a way to mount my WERA drivers to a Multi-Board… and it turned into something far more useful. The original model was good, but I needed multiple diameters and more flexibility, so I remixed it into a fully parametric tool clip that can hold an entire range of tools — round, not-so-round, and everything in between.Support MultiBoard Parts (Required)This does not mount directly on a Multiboard and will require a supporting snap or screw. I suggest a raised screw; I find it works the best since this is a friction-fit part. This is the raised snap I would suggest: https://thangs.com/designer/Multiboard/3d-model/Raised%20Moderate%20Weight-Bearing%20Snap-989145This is the raised screw I would suggest. The big head if you need to push further away from the wall. The flat if you are ok with the 1mm distance built into the part. Big head: https://thangs.com/designer/Multiboard/3d-model/9%2520mm%2520Big%2520Thread%252C%2520Pu