Thingiverse

Dyson Airwrap Wallmount

by Unknown

31 Downloads

31 Likes

1 Makes

Hey,

we needed a place for our Dyson Airwrap in the Bathroom.

________________________________________
Update May 2020:
I made the hole a little more narrow for extra holding power. It is *v8_narrow*. Yes, 8. I have been doing some prototyping :D
________________________________________

Therefore I desinged this beauty. It is fixed to the wall using a 4mm Screw. We had a pre-drilled hole so the design is only for one screw. Feel free to adjust it to your needs - -.step file attached. The Airwrap fits very well and won't fall out, regardless of which attachement you are using.

I used Eryone TPU in Grey to match the Airwrap.

I printed the part in 0.3mm using a .4 nozzle. With 20% Gyroid Infill and 3 walls, 3 Top layers and 4 bottom layers.As you can see in the timelapse, I have some stringing problems, but they are no problem for a mildly sharp exactor knife :) If you like the Design please leave a like. And if you printed it or a remix, please post a make, that would

Airwrap bathroom bathroom Organizer dyson hair hairdryerholder hair dryer mount wall wallholder wallmount wall mount Airwrap bathroom bathroom Organizer dyson hair hairdryerholder hair dryer mount wall wallholder wallmount wall mount

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format