Thingiverse
E-Paper Display and ESP32 Case
von bennetfabu
2
Downloads
2
Likes
0
Makes
Case for esp32 driven E-PaperDisplay. what to show on the display is irrelevant, I created a system of digital post-its connected to the PC to send the strings to show.
Dimensions are suitable for a waveshare 4.2" EPD
The rear case can be used for maintenance in my case to manage the SD card in case it gets damaged, but if it glues easily being attached by two pegs.
In the back plate I also made a space for an NFC tag to insert information of any kind such as the serial number or device information.
Dimensions are suitable for a waveshare 4.2" EPD
The rear case can be used for maintenance in my case to manage the SD card in case it gets damaged, but if it glues easily being attached by two pegs.
In the back plate I also made a space for an NFC tag to insert information of any kind such as the serial number or device information.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!