E type Jaguar Hueforge

Project: JaguarEType.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA jayo black Transmission Distance: 0.1 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA jayo white Transmission Distance: 7.6 PLA jayo red Transmission Distance: 5.8This print uses 4 unique filamentsSwap Instructions: Start with black At layer #8 (0.72mm) swap to Blue Gray At layer #11 (0.96mm) swap to white At layer #21 (1.76mm) swap to red for the rest.