Slicer Discord
E-Vader CT-22 Speedometer Display Mount – Modelo 3D imprimible de MakerWorld MakerWorld
Vehicles

E-Vader CT-22 Speedometer Display Mount

1 Descargas
1 Likes
0 Makes
Ver Modelo
This is my bracket to mount a CT-22 display/speedo/cluster to the factory bracket of the Venom E-Vader or Boom BD1578Z. I have a few different versions. You can mount the adapter bracket to the eVader with the factory screws and washers. The screen has 2 studs that use 2 nuts (10mm socket) to bolt to the bracket. I printed mine in PETG, 4 walls, and 50% infill with good results. Supports will be needed for printing. Squished bushings:The squished bushings version is what I had to use for my bike as the factory install crushed the bushings to where the factory gauge didn't even slot through the bushing. Standard bushing:This is designed to match the factory display mount with normal bushings. Thicc No Bushing:I made this version for someone who had got their eVader with no bushings and the top hole cut out.
Categoría
Vehicles
Fuente
MakerWorld
Publicado
Actualizado
Lo que necesitas para imprimir: Intermedio Baja confianza
Pieza única Tornillería requerida
Soportes 1/3
Ensamblaje 0/3
Ajustes 1/3
Tamaño de cama 0/3
Postproceso 1/3
Impresora
FDM / FFF
Formato de archivo
STL
Material
PLA, PETG
Postprocesado
Tornillería
Software
Cura, PrusaSlicer o similar
Aún no hay valoraciones
Aún no hay comentarios – ¡sé el primero!

Modelos similares

1 Sugerencias
Feed Blog Slicer Calculadora Búsqueda por imagen Enviar Contacto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Añadir a colección