Thingiverse
E3D Hemera Effector Mount for Delta Printers
by wesc
63
Downloads
42
Likes
0
Makes
An effector and fan shroud mount for the E3D Hemera for delta printers.
This direct drive effector works quite well with well designed delta printers like the Ultibots D300VS or the various SeeMeCNC printers that use the SeeMeCNC machined aluminum barbells.
### Update:
Added a new fan duct that has a much more optimized air flow. Print the Hemera Claws Fan Duct.stl file, not the other fan manifold file. This Claws manifold is loosely based on [Hangtight's Hemera fan duct](https://www.thingiverse.com/thing:4042492), but is made from the ground up in Fusion 360.
### Older Updates:
Added a universal mount. This has 3 holes placed around the perimeter for heatserts. Use these to mount an adapter for other deltas. See drawing for relevant dimensions.
Added 35mm face mount ball stud and Traxxis 40mm mount. I have not tested these.
### Printing
Print the effector with the top facing the bed. Supports are built into the models. The fan shroud should be printed w
This direct drive effector works quite well with well designed delta printers like the Ultibots D300VS or the various SeeMeCNC printers that use the SeeMeCNC machined aluminum barbells.
### Update:
Added a new fan duct that has a much more optimized air flow. Print the Hemera Claws Fan Duct.stl file, not the other fan manifold file. This Claws manifold is loosely based on [Hangtight's Hemera fan duct](https://www.thingiverse.com/thing:4042492), but is made from the ground up in Fusion 360.
### Older Updates:
Added a universal mount. This has 3 holes placed around the perimeter for heatserts. Use these to mount an adapter for other deltas. See drawing for relevant dimensions.
Added 35mm face mount ball stud and Traxxis 40mm mount. I have not tested these.
### Printing
Print the effector with the top facing the bed. Supports are built into the models. The fan shroud should be printed w
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!