Thingiverse
E3D V6 Hot end Mount for Ormerod
di Cola
135
Download
69
Likes
3
Makes
Mount for ED3's V6 all metal hot end for RepRapPro's Ormerod 3d printer. It is a direct replacement for the standard Ormerod hot end. No Z axis height is lost switching to this mount.
The assembled hot end with a 11x40mm fan installed measures 42x40mm and weighs 83g. The Stock Ormerod Hot end with it's 20x40 fan Measures 52x58mm and is 96g. A 35% infill was used for both hot end's printed parts. The V6 assembly is both smaller and lighter then the standard Ormerod hot end.
I have had no issues in testing. Printing at 180c for PLA there was no visible effect on any of the mount parts. I have not printed any ABS, however I kept it at 250c for 1 hour and there was no visible change on the PLA mount, however I still suggest printing the mount in ABS if you will be using higher temps.
The assembled hot end with a 11x40mm fan installed measures 42x40mm and weighs 83g. The Stock Ormerod Hot end with it's 20x40 fan Measures 52x58mm and is 96g. A 35% infill was used for both hot end's printed parts. The V6 assembly is both smaller and lighter then the standard Ormerod hot end.
I have had no issues in testing. Printing at 180c for PLA there was no visible effect on any of the mount parts. I have not printed any ABS, however I kept it at 250c for 1 hour and there was no visible change on the PLA mount, however I still suggest printing the mount in ABS if you will be using higher temps.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
