Thingiverse
E3D V6 Mount
door JacoConradie
33
Downloads
25
Likes
0
Makes
E3D V6 mount for the Two Trees Bluer.
Don't really know what other printers it would fit on but the mount holes are 20mm apart, seems pretty standard.
Print the part in the orientation they are at with support from the build platform only.
I printed in ABS, but any of the other higher temperature materials should be fine. Someone should print the clamp in clear petg and put a single rgb led in there to indicate some stuff.
There are two versions of the Main Body. Main Body is for use with M3 sonic insert and the No Sonic is for tapping directly into the plastic.
You will need the following screws:
4 x M2.5 x 15mm (for the 40mm blowers)
6 x M3 x 15mm (for the 30mm fan and the clamp)
2 x M3 x 8mm (for mounting to the plate)
2 x Sonic inserts.
.step files are included if you want to make some changes.
Don't really know what other printers it would fit on but the mount holes are 20mm apart, seems pretty standard.
Print the part in the orientation they are at with support from the build platform only.
I printed in ABS, but any of the other higher temperature materials should be fine. Someone should print the clamp in clear petg and put a single rgb led in there to indicate some stuff.
There are two versions of the Main Body. Main Body is for use with M3 sonic insert and the No Sonic is for tapping directly into the plastic.
You will need the following screws:
4 x M2.5 x 15mm (for the 40mm blowers)
6 x M3 x 15mm (for the 30mm fan and the clamp)
2 x M3 x 8mm (for mounting to the plate)
2 x Sonic inserts.
.step files are included if you want to make some changes.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
