EAF Mount for Redcat 51

This mount is for the RedCat 51 to connect a ZWO EAF. It has a riser that moves the Redcat higher up and places the EAF below to connect a belt to the helical focuser.


**You will need the following parts to install to your RedCat 51:**
2 x 8mm M4 bolts
2 x 16mm M6 bolts
2 x 50mm M6 bolts
GT2 Timing Belt Width 6mm Fit (cut to size & use belt clip, no length required)
GT2 Timing Belt Pulley 16 Teeth Bore 5mm Width 6mm

**Instructions:**
The timing belt needs to go around the bottom gear and through the slot on the belt ring. You can use the belt-clip to hold it in (see photo). If you wish to use one of the shims to add tension you may.


**Credit:**
The mount and riser were inspired by DeepSkyDad's EAF mount but with some adjustable holes for tension. I mounted it the other direction and made it smaller so it wouldn't weigh as much.
The belt ring design came from the Redcat 51 Motorized Focuser - https://www.thingiverse.com/thing:4092017
The belt-clip design came fro