Eagle

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Base Thickness of 0.56mmThe Max allowed Thickness is 1.84mm and the Actual Thickness is 1.78402mmFilaments Used:PLA ******+ Black Transmission Distance: 0.3PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA ****** + White Transmission Distance: 6This print uses 3 unique filamentsSwap Instructions:Start with BlackAt layer #8 (0.72mm) swap to Blue GrayAt layer #10 (0.88mm) swap to White for the rest.