Eagle Bookmark

Eagle BookmarkPrints best at .2mm nozzle but .4 mm nozzle also works Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.64mm and the Actual Thickness is 1.12mmFilaments Used: PLA Black Transmission Distance: 0.3 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 2 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Jade White for the rest.